Skip to content

H2CAP DISSOLVED HYDROGEN REAGENT

The best design hydrogen water generator

H2CAP DISSOLVED HYDROGEN REAGENT PACKAGE

Airtight sealed H2CAP Dissolved Hydrogen Reagent 10pcs, User manual

h2cap dissolved hydrogen regent, dh regent, blue drop

H2CAP DISSOLVED HYDROGEN REAGENT

H2CAP Dissolved Hydrogen Reagent allows you to test amount of dissolved hydrogen in the hydrogen water made by H2CAP.
The reagent was made disposable after for the user convenience.

The pipette type of test reagent made from the other companies tends to be inaccurate
due to the condensation of the components of reagent resulting from volatilization of gas
that leads to gasification of the components when exposed to the air.
But with the reagent made by IonFarms, by making use of the disposable sachet type of reagent,
it allows the users to measure dissolved hydrogen up to 1,500ppb.
Such type of reagent also will enable users to obtain much more accurate results and storage convenience.

h2cap dissolved hydrogen regent
CONVENIENT USAGE

Simply make drops of the reagent into the water to be tested.

EXACT RESULTS

H2CAP Dissolved Hydrogen Reagent was made airtight disposable in order to minimize air contact that may alter test results.

STORAGE CONVENIENCE

The H2CAP Dissolved Hydrogen Reagent is a chemical compound. Therefore, it is to be handled with care. You need not be concerned about it since IonFarms DH test reagent was made airtight disposable. Simply store them at room temperature.

WHAT IS DH?

DH is a measurement of dissolved hydrogen in the water. It is written with a unit of PPB(Parts Per Billion).
0 ppb means that there is no active hydrogen at all while 1,000 means
that 1µg of active hydrogen is present in 1L.
More often than not, water with 1,000ppb is considered as hydrogen-rich water.

HOW TO DO THE H2CAP DISSOLVED HYDROGEN REAGENT TEST

Best hydrogen water generator H2CAP
how to test dissolved hydrogen reagent
how to test dissolved hydrogen reagent

※ Use water temperature of 25C ~ 35C when running the test.

① Shake the reagent well for the components to mix properly before starting the test.

② Pour the hydrogen water to be tested until the indicated line of the provided test bottle.

③ Make 7 drops of reagent to the bottle.

④ If the reagent drops turn transparent, start adding 1 drop at a time.

⑤ The water contains 1,000ppb ~ 1,100ppb if they turn blue on the 11th drop.

* Slightly shake the test bottle every time the reagent is dropped.
* DH test results may vary depending on the environment. Use the hydrogen meter for exact results.
* For more exact results, do the test after running the cleaning mode.
* Do not reuse the reagent once opened.
* Check the video below for a guideline.

en_USEnglish