Technical Specification

H2CAP Technical Specification

Everything measured, nothing exaggerated. H2CAP has a hydrophilic platinum PEM — when idle for several days, keep a little water inside and the cap closed.

Hydrogen Concentration
Up to 1,500 ppbtested (1,200 typical)
Generation Time
3 min 30 sper 500 ml
Technology
Platinum SPE/PEMsolid polymer electrolysis
Bottle Fit
30 mm neckuniversal standard
Power
USB-Cno battery to replace
Weight
120 glightest in class
Materials
BPA-freefood-grade Tritan
Byproducts
Noneozone / chlorine-free
ModelH2CAP Plus
H₂ Conc.Up to 1,500 ppb
MethodSPE / PEM
ElectrodePlatinum-Ti plates
Cycle≈ 3 min 30 s / 500 ml
Bottle FitStandard 30 mm neck
PowerUSB-C · power-bank ready
ControlSmart auto shut-off
HousingBPA-free Tritan
Weight≈ 120 g
ByproductsOzone & chlorine-free
CareKeep PEM hydrated
See It In Action

Portable Hydrogen,
Anywhere You Go

H2CAP Plus turns almost any standard bottle into hydrogen-rich water in about 3½ minutes — no installation, no bulky base, and no internal battery to replace.

  • Fits standard 30 mm bottles — take it anywhere
  • USB-C powered — charge from any power bank
  • Food-grade, BPA-free Tritan — safe, durable build
H2CAP Plus
1,500
ppb H₂ concentration
3:30
min per 500 ml
120 g
lightest in class
20+
countries distributed
Buyer's Guide

How to Choose the Best Hydrogen Water Bottle

Beyond portability, weigh six factors before you buy — or before you stock a shelf.

H₂ Concentration (ppb)

Most positive research uses 1,000–1,600 ppb. Below 500 ppb may not match published protocols. Verify with a reagent test kit.

SPE / PEM Technology

Only SPE/PEM fully separates H₂ from O₂ and eliminates ozone/chlorine. Basic electrolysis cannot achieve this.

Materials Safety

Require BPA-free, food-grade materials and platinum-coated titanium electrodes — not stainless steel that can leach.

Power & Longevity

Internal Li-ion cells degrade in 12–18 months. USB-C devices with no internal battery last far longer.

Universal Compatibility

A universal 30 mm neck fit means one device works across standard bottles — not locked to one proprietary vessel.

Wholesale Readiness

Documentation, MOQ pricing, and co-marketing support matter for B2B buyers building a sustainable retail line.

Pro tip for distributors: ask any supplier for a third-party or reagent-kit measurement of dissolved H₂ at 20–25 °C. Marketing "ppm" numbers above ~1.6 ppm in an open bottle are not physically possible (see the Comparison section).
Scroll to Top